DISCOUNTS FOR CONTRACTORS | Become a Trade Pro
DISCOUNTS FOR CONTRACTORS | Become a Trade Pro

(888) 405-6064

Cancel Call Text

Fireye BLL510 LCD Display Module for Use with BurnerLogiX™ Control System

More Views

Special Price $416.95

Regular Price: $500.34

You Save 17%

In Stock

Special Price $416.95

Regular Price: $500.34

Availability: Ships Next Business Day if ordered by 1 PM EST
Free shipping

Need it faster?

Give us a call (888) 405-6064
Are you a trade professional?

    Product Description

    The BurnerLogix system offers optional vacuum fluorescent (VFD) and liquid crystal (LCD) displays that may be either plugged in or mounted remotely to give full language descriptors of current status and diagnostic lockout information.

    In order to change the factory default parameters stored in the programmer module an optional keypad/display (BLV512 or BLL510) is required. All configurable parameters are stored within the PROGRAM SETUP sub-menu. The keypad/display module provides tactile feedback keys that are used to access the sub-menus inherent in the BurnerLogix system.

    The optional alpha-numeric display is made up of 2 lines by 16 characters per line and is available in either vacuum fluorescent or liquid crystal formats. The advantage of VFD is high brightness and extended temperature range to -40°F. Both displays contain a fully functional keypad allowing the user to easily scroll through the various menus to view the current operating status, review programmer configuration, and lockout history.

    When mounted remotely using kits 129-178-4 or 129-178-8, each display meets NEMA 4X requirements. Refer to instruction sheet 133-675 for details.

    Installation Procedure

    The display module is held into the BurnerLogix chassis/amplifier by mounting tabs designed into the display housing.

    Using the thumb and index finger, grasp the left and right edges of the blank display module and pull forward until removed. Insert one end of the supplied 4 inch display cable into the jack located in the back of the display module. Plug the other end of the cable into the jack located inside the chassis/amplifier module.Using the thumb and index finger, grasp the left and right edges of the blank display module and insert it into the compartment of the chassis/ amplifier module. Push the unit into the unit until a positive click is realized.

    Keypad Description

    The NEXT key is used to scroll down through the various menus and is also used to increment the value when in the modify mode. The BACK key is used to scroll up through the menus and is also used to decrement the value when in the modify mode. The MODE key is used to enter a sub-menu when the displayed item indicates a sub-menu with a right facing arrow and also to exit the sub-menu and move on to the next main menu item. The RESET/MDFY key is used to reset the BurnerLogiX from a lockout condition, force a recycle of the programmer, indicate to the system the value displayed is to be modified or when done with the modification.


    Resources
    Specifications

    General Characteristics

    List of display of main menu items in BurnerLogiX:
    L1-3 OPENcurrent operating status
    BNR HOURStotal hours terminal 7 (main fuel) is energized
    BNR CYCLEStotal burner cycles
    BNR LOCKOUTStotal system lockouts
    SYS HOURS total hours installed
    PROGRAM SETUPreview and set program parameters
    LOCKOUT HISTORYlast 10 lockouts with burner hour and cycle time stamp.
    SYSTEM INFOview flame signal averages, M-D and M-8 status, select language, clear history feature.
    Reviews
    Product Questions

    Product Questions

    No questions yet. Be the first to ask the question!
    Shipping Calculator