(888) 405-6064

Cancel Call Text

Goodman GMES960803BN 80k BTU High-Efficiency Multi Speed Gas Furnace

Item Code: 

More Views

Special Price $1,175.00

Regular Price: $1,351.25

You Save 13%

In Stock

Special Price $1,175.00

Regular Price: $1,351.25

Availability: Ships in 3-5 business days.
Free shipping

Need it faster?

Give us a call (888) 405-6064
Are you a trade professional?

    Product Description

    80,000 BTU High-Efficiency Multi Speed Single-Stage Gas Furnace - GMES960803BN

    Standard Features Cabinet Features

    • Heavy-duty aluminized-steel tubular heat exchanger
    • Stainless-steel secondary heat exchanger
    • Single-stage gas valve
    • Durable Silicon Nitride igniter
    • Quiet single-speed induced draft blower
    • Self-diagnostic control board with constant memory fault code history output to a LED
    • All models comply with California 40 ng/J = Low NOx emissions standard
    • For installation in California’s South Coast Air Quality Management District (SCAQMD) only: This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to a mitigation fee of up to $450. This furnace is not eligible for the SCAQMD Clean Air Furnace Rebate Program:
    • AHRI Certified; ETL Listed

    Cabinet Features

    • Designed for multi-position installation - GMES96: upflow, horizontal left or right GCES96: downflow, horizontal left or right
    • Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
    • Easy-to-install top venting with optional side venting - GMES96/upflow models only
    • Convenient left or right connection for gas and electrical service
    • Cabinet air leakage (QLeak) ≤ 2%
    • Heavy-gauge steel cabinet with durable finish
    • Fully insulated heat exchanger and blower section
    • Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications

    The art of precision

    Aluminized-Steel Tubular Primary Heat Exchanger - Distinctive tubular aluminized steel construction formed using wrinkle-bend technology results in an extremely durable heat exchanger. Paired with a stainless-steel secondary heat exchanger, this combination provides reliability, durability and efficiency.

    Efficient and Quiet Multi-Speed Circulator Motor - Provides quiet system startup and shutdown with highly-efficient performance.

    Durable Silicon Nitride Igniter – Eliminates the need for an energy-wasting pilot light.

    Quiet, Single-Speed, Induced-Draft Blower – Provides precise control and enhanced energy-efficient performance as compared to a natural draft furnace.

    Self-Diagnostic Control Board – Continuously monitors the system for consistent, reliable operation, stores last diagnostic codes in memory and indicates condition through LED for quick troubleshooting.

    Thermally-Insulated Cabinet – The fully insulated cabinet means air leakage of less than 2% to maximize the heat transfer efficiency and lower blower noise.



    General Characteristics

    Heating Data:
    High Fire Input *1 80,000
    High Fire Output *1 76,800
    AFUE *2 96
    Temperature Rise Range (°F) 35-65
    Vent Diameter *3 2"-3"
    No. of Burners 4


    Circulator Blower:
    Available AC @ 0.5" ESP 1.5-3
    Size (D x W) 11" x 8 "
    Horsepower @ 1075 RPM 1/2
    Speed 5


    Filter Size (in *2) (Qty) (1) 16 x 25 (side or bottom)


    Electrical Data:
    Min. Circuit Ampacity *4 9.6
    Max. Overcurrent Device (amps) *5 15


    Shipping Weight(LBS) 114

    1. Natural Gas BTU/h
    2. DOE AFUE based upon Isolated Combustion System (ICS)
    3. Installer must supply one or two PVC pipes: one for combustion air (optional) and one for the flue outlet (required). Vent pipe must be either 2" or 3" in diameter, depending upon furnace input, number of elbows, length of run and installation (1 or 2 pipes). The optional Combustion Air Pipe is dependent on installation/code requirements and must be 2" or 3" diameter PVC.
    4. Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.
    5. Maximum Overcurrent Protection Device refers to maximum recommended fuse or circuit breaker size. May use fuses or HACR-type circuit breakers of the same size as noted.


    • All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply.
    • Gas Service Connection 1/2" FPT
    • Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical Code and/or all existing local codes.
    • For bottom return: Failure to unfold flanges may reduce airflow by up to 18%. This could result in performance and noise issues.
    • For servicing or cleaning, a 24" front clearance is required. Unit connections (electrical, flue and drain) may necessitate greater clearances than the minimum clearances listed above. In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility clearances are greater.
    Product Questions

    Product Questions

    No questions yet. Be the first to ask the question!
    Shipping Calculator