Dow Great Stuff Pro Window & Door 20 oz Foam (5 Cans) - 187273

More Views

Special Price $61.44


Regular Price: $108.76

You Save 44%
Energy Score
Energy Score

In Stock

Special Price $61.44


Regular Price: $108.76

Availability: Same day shipping if ordered by 1pm EST.
This Product is ORM-D. Expedited is not available.
Free shipping

    Product Description

    This product includes 5 cans of 187273.

    Note: This is hazardous material, please read safety instructions before dealing with this item.

    GREAT STUFF PRO™ Window & Door is specifically formulated to seal gaps between window and door frames and their rough openings. It works hard without being hard on surfaces.

    This low-pressure, flexible polyurethane foam sealant:

    • Is applied with a foam-dispensing gun for greater precision and access to hard-to-reach places.
    • Comes in a can that’s reusable for up to 30 days, minimizing waste
    • Expands just enough to seal gaps without bowing or bending the frame, when applied appropriately.
    • Bonds to vinyl, wood and metal frames.
    • Offers greater insulation value than chinked fiberglass or caulk
    • Forms a durable, airtight and water-resistant seal that can lower energy bills.
    • Expands and contracts to allow for various weather conditions.
    • 16-18 windows (20 oz gun version)*
    • Repels and deflects water.

    It’s easy to use because it’s:

    • Soft, pliable , easy to stuff back into gap without trimming
    • Tack-free in 3-10 minutes. 1
    • Ready to trim within 60 minutes.
    • Flexible after it cures.
    • Paintable, stainable and sandable.
    • Yellow-colored so you can see it.
    • UL Classified.
    • Available in 20-oz. straw and 20-oz. gun applied cans.

    70 ± 5 °F and 50 ± 5 %RH, 1 inch bead diameter, 6 inch length. Cure rate is dependent on temperature, humidity, and size of foam bead.
    *U.S. ONLY - Based on Average-sized windows (36” x 60” , gap 3/8” wide and 1” deep)


    General Characteristics

    Typical Physical Properties of GREAT STUFF PRO Window & Door Insulating Foam Sealant

    Flexural Strength, ASTM C203, Parallel to rise, psi (kPa), min.5.2 (35.9)
    Apparent Aged k-factor (Thermal Conductivity) per inch (25 mm),0.262
    ASTM C518 @75°F (24°C) mean temp., Btu•in/ft2•hr•°F (W/m•°C), min.(0.038)
    Compressive Strength, ASTM D1621, Parallel to rise, psi (kPa)2.8 (19.2)
    Apparent Density, ASTM D1622, pcf (kg/m3)1.63 (26)
    Dimensional Stability, ASTM D2126, % Volume Change
    100°F/100%[email protected]-0.646
    -40°F/[email protected]1.306
    Open Cell Content, ASTM D6226, %<88.00
    Tensile Strength, ASTM D1623, Parallel to rise, psi (kPa)5.7 (39.3)
    Elongation, %, “Test immed. after cut”19.6
    Shear Strength, ASTM C273, Parallel to rise, psi (kPa)7.07 (48.7)
    Flame Spread/Smoke Developed(2), ASTM E8410/20

    Product Question

    Product Questions

    No questions yet. Be the first to ask the question!
    Shipping Calculator