Dow Great Stuff Pro Window and Door 20oz Foam (5 cans) - 187273

More Views

Special Price $61.44


Regular Price: $108.76

You Save 44%
Energy Score
Energy Score

In Stock

Special Price $61.44


Regular Price: $108.76

Availability: Same day shipping if ordered by 1pm EST.
This Product is ORM-D. Expedited is not available.
Free shipping

    Product Description

    This product includes 5 cans of 187273.

    Note: This is hazardous material, please read safety instructions before dealing with this item.

    Dow Great Stuff Pro 187273 foam, for insulating windows and doors.

    It's easy to form durable, airtight, water-resistant bonds to vinyl, wood and metal frames. This one-component, minimal-expanding, low pressure-build, flexible polyurethane foam is exclusively formulated to air seal the gap between a window or door frame and its rough opening. The foam expands only enough to generate an effective seal. When applied properly, Dow GREAT STUFF PRO Window & Door 187273 is proven not to distort or bow window and door frames.

    GREAT STUFF PRO Window & Door Insulating Foam Sealant is designed to form a durable, airtight, water-resistant bond to vinyl, wood and metal surfaces. Its foam skin repels and deflects water, which can help reduce the potential for moisture damage in frame openings.

    The straw foam Great stuff loses between 10 to 15% of its Yield through the straw, whereas the Pro Gun draws every bit of foam from the can and is much quicker on the job. Time and Yield are essential ingredients for profit.


    • Proprietary low-pressure formula designed
      not to bow bend window and door frames
    • Ideal for filling sealing other areas where low-pressure
      flexible foam is desirable
    • Provides real insulation value which complements energy
      efficiency of the window or door.
    • Greater insulating value
      than chinked fiberglass or caulk
    • Soft, pliable foam is forgiving, easier to remove if gap is overfilled
    • Cured foam can be stuffed back into the gap without trimming
    • Repels/deflects water
    • Tack free in 8 minutes; Trims within 1 hour
    • Flexible foam permits expansion and contraction
    • Paintable, sandable and stainable
    • Yellow colored foam
    • Cures flexible
    • Conforms to ASTM & AAMA standards
    • Expands to take the shape of cracks and voids, helping stop drafts
    • Reduces pathways where insects can enter
    • Is tack-free in 5-10 minutes, trims within 1 hour, fully cured in 12 hours

    GREAT STUFF PRO Window & Door Insulating Foam Sealant is available in gun- and straw-applied versions. This listing is for the gun-applied version.


    GREAT STUFF PRO Window & Door should be applied at temperatures between 40°F and 100°F (4°C and 38°C) at relative humidity > 20 percent. Surface where applied should be free of dust, grease, oil, wax and release agents. Damp surfaces will not impair the bond.


    General Characteristics

    Typical Physical Properties of GREAT STUFF PRO Window & Door Insulating Foam Sealant

    Flexural Strength, ASTM C203, Parallel to rise, psi (kPa), min.5.2 (35.9)
    Apparent Aged k-factor (Thermal Conductivity) per inch (25 mm),0.262
    ASTM C518 @75°F (24°C) mean temp., Btu•in/ft2•hr•°F (W/m•°C), min.(0.038)
    Compressive Strength, ASTM D1621, Parallel to rise, psi (kPa)2.8 (19.2)
    Apparent Density, ASTM D1622, pcf (kg/m3)1.63 (26)
    Dimensional Stability, ASTM D2126, % Volume Change
    100°F/100%[email protected]-0.646
    -40°F/[email protected]1.306
    Open Cell Content, ASTM D6226, %<88.00
    Tensile Strength, ASTM D1623, Parallel to rise, psi (kPa)5.7 (39.3)
    Elongation, %, “Test immed. after cut”19.6
    Shear Strength, ASTM C273, Parallel to rise, psi (kPa)7.07 (48.7)
    Flame Spread/Smoke Developed(2), ASTM E8410/20

    Product Question

    Product Questions

    No questions yet. Be the first to ask the question!
    Shipping Calculator