Dow Froth Pak 650 Class A (E84) Spray Foam Insulation Kit with 15' Gun Hose Assembly

Item Code: 

More Views

Special Price $784.95


Regular Price: $932.99

You Save 16%
Energy Score
Energy Score

In Stock

Special Price $784.95


Regular Price: $932.99


Same day shipping if ordered by 1pm EST. This Product is Hazmat. Expedited is not available. A signature is required at the time of delivery.

$1.07 per board foot

Free shipping

    Product Description

    Dow Froth Pak 650 Class A (E84) Spray Foam Kit

    FROTH-PAK Foam Insulation is a closed cell, two-component, quick-cure polyurethane spray foam that fills cavities, penetrations, cracks and expansion joints. Unlike one-component foam, FROTH-PAK Foam Insulation is a chemically cured foam, significantly reducing curing time.

    Theoretical Field:650 Board Feet.

    FROTH-PAK Foam Insulation dispenses, expands and becomes tack-free in seconds. The product will skin over in 30-40 seconds and will be completely cured in minutes.

    The Class-A rating (flame spread of 25 or less) of FROTH-PAK Foam Insulation allows its use in a wide range of interior and exterior industrial, commercial, institutional and residential settings. Check with local codes prior to use. If used in an exterior setting, a coating must be applied for ultraviolet (UV) protection.

    Kit includes:

    • 1 Iso (A) cylinder 340317
    • 1 Polyol (B) cylinder 340320
    • 8 Cone white spray nozzles - 259219
    • 4 Fan spray nozzles - 259216
    • 15 ft. gun hose assembly (GHA)
    • 1 petroleum jelly packet

    If you would like to add an optional 3M safety kit to your Froth Pak package, simply select Add 3M Safety Kit from the product options and then Add to Cart. Your selections will be reflected on the check out page.

    This 3M Safety Kit Includes:

    • 3M Disposable Protective Coverall Safety Work Wear
    • 3M Tekk Protection Nitrile Gloves
    • 3M Half Facepiece Disposable Respirator Assembly, Organic Vapor/Acid Gas Respiratory Protection , Large - 5303
    • 3M Safety Splash Goggle, Clear Anti Fog Lens - 334AF


    General Characteristics

    Flame Spread/Smoke Developed(1)(2), ASTM E84/UL 72325/350
    Nominal Density, ASTM D1622, lb/ft31.75
    Thermal Resistance(3) per inch, ASTM C518, ft2-h-°F/Btu, R-value, min.
    Aged 90 days at 140°F5.6
    Air Leakage,
    ASTM E283, cfm/ft2 @ 1.57 psf0
    ASTM E2178, L/s/m2 @ 75 Pa0
    Water Vapor Permeance, ASTM E96
    perm @ 1" thick3.9
    perm @ 2" thick 3.9
    Water Absorption, ASTM D2842, % by volume 2.17
    Dimensional Stability, ASTM D2126, % volume change
    100°F/100% RH @ 1wk4.6
    100°F/100% RH @ 2wks5.0
    158°F/100% RH @ 1wk6.5
    158°F/100% RH @ 2wks5.1
    -40°F/amb RH @ 1wk0.9
    -40°F/amb RH @ 2wks0.9
    158°F/amb RH @ 1wk3.1
    158°F/amb RH @ 2wks2.3
    Compressive Strength, ASTM D1621, lb/in2, parallel21.1
    Flexural Strength, ASTM C203, lb/in2, parallel22.7
    Tensile Strength, ASTM D1623, lb/in2, parallel26.7
    Shear Strength, ASTM C273, lb/in2, parallel16.7
    Maximum Service Temperature, °F240


    Product Question

    Product Questions

    Is this open or closed cell foam insulation I need to insulate the floor above my crawl space and exterior walls of my basement and some roof area in my garage above my garage door where it is not insulated and dry walled we live in Denver Co which is a dryer climate So I'm wandering if this will be the proper foam to use.
    Thanks for your time!
    Is this 650 board feet at 1" or 2" thick?
    Will this work as a vapor barrior for a wine cellar at 1” depth. Also, how much sq foot does this kit translate to?
    Is there a temperature range that I should be using this product with - a temperature too high or too low for the system to work properly.

    What is the r-value at 1 in
    I'm wondering if this product could be used to fill the spaces inside the walls/ceiling of a 7'x7' plastic shed. There is a lot of free space inside these plastic walls and roof that would benefit from insulation for my cats. (Both Winter and Summer) I'm picturing shooting this foam into drilled holes at specific/recommended space intervals because of how fast it hardens. THanks for your feedback! Teresa
    Can this be sprayed on a ceiling, I would like to insulate the floor of my utility room bathroom?
    Will this product stick on stainless steel surface?
    Shipping Calculator