Dow Froth Pak 620 Sealant Spray Foam Kit with 15' Gun Hose Assembly

Item Code: 
341171_347036_158398

More Views

Special Price $707.95

lazyload

Regular Price: $872.60

You Save 19%
Energy Score
Energy Score

In Stock

Special Price $707.95

lazyload

Regular Price: $872.60

Availability:

Same day shipping if ordered by 1pm EST. This Product is Hazmat. Expedited is not available. A signature is required at the time of delivery.


$1.08 per board foot

Free shipping

    Product Description

    FROTH-PAK Foam Sealant is a closed cell, two-component, quick-cure polyurethane spray foam that fills cavities, penetrations, cracks and expansion joints. Unlike one-component foam, FROTH-PAK Foam Insulation is a chemically cured foam, significantly reducing curing time. It dispenses, expands and becomes tack-free in seconds. The product will skin over in 30-40 seconds and will cure in minutes.

    Theoretical Field: 620 Board Feet, 1.46 m3

    Kit Includes:

    • 1 Iso (A) cylinder - 341171
    • 1 Polyol (B) cylinder - 347036
    • 15' Gun Hose assembly - 158398
      • 1 dispensing gun
      • 15 ft. hose
      • Assorted nozzles
        • 8 Cone white spray - 187918
        • 4 GG white spray - 187915
      • 1 wrench
      • 1 petroleum jelly packet
      • 1 instruction sheet

    BASIC USE

    FROTH-PAK™ Foam Sealant can be used in interior or exterior commercial, residential, agricultural, industrial and institutional settings.** If used in an exterior setting, a coating must be applied for ultraviolet (UV) protection.

    Typical commercial applications include spray polyurethane foam roof repair and sealing roof perimeters and parapet walls.

    Residential uses include:

    • Roof and wall junctions
    • Wall and attic penetrations
    • E lectrical, mechanical and plumbing penetrations
    • Other gaps, cracks or crevices in the building envelope

    Sizes

    FROTH-PAK™ Foam Sealant is typically sold as a complete kit that includes pressurized “A” and “B” cylinders, plus dispensing gun/ hose assembly and accessories. FROTH-PAK™ Foam Sealant is also available in refillable, returnable tanks for applications requiring a large amount of foam, such as poultry houses. See Table 1 for size and yield information.

    Physical Properties

    FROTH-PAK™ Foam Sealant exhibits the typical properties and characteristics indicated in Table 2 when tested as represented.

    Fire Information

    FROTH-PAK™ foam is combustible and will burn if exposed to open flame or sparks from highenergy sources. Do not expose to temperatures above 240°F (116°C).

    INSTALLATION

    Complete operating instructions are provided with each FROTH-PAK™ Foam Sealant purchase. Read all information and cautions before application. Note: Avoid overfilling restricted spaces. Chemicals exert force during reaction, and expansion of foam may result in substrate deformation.

    * Actual cure time will depend on temperature, foam thickness, the specific nozzle used, etc.

    ** For rim/band joist applications, use FROTH-PAK™ Foam Insulation (available in U.S. only) to meet building code specifications


     NEED A SAFETY KIT?

    If you would like to add an optional 3M safety kit to your Froth Pak package, simply select Add 3M Safety Kit from the product options and then Add to Cart. Your selections will be reflected on the check out page.

    This 3M Safety Kit Includes:

    • 3M Disposable Protective Coverall Safety Work Wear
    • 3M Tekk Protection Nitrile Gloves
    • 3M Half Facepiece Disposable Respirator Assembly, Organic Vapor/Acid Gas Respiratory Protection , Large - 5303
    • 3M Safety Splash Goggle, Clear Anti Fog Lens - 334AF

    Specifications

    General Characteristics

    TYPICAL PHYSICAL PROPERTIES OF FROTH-PAK™ FOAM SEALANT

    These properties are typical but do not constitute specifications.

    Property and Test MethodValue*
    Flame Spread/Smoke Developed,** ASTM E84/UL 723 @ 4" wide by 2" thick≤25 / ≤450
    Nominal Density, ASTM D1622, lb/ft³1.75
    Thermal Resistance(3) per inch, ASTM C518, ft²•h•°F/Btu, R-value, min
    Initial
    Aged LTTR measured at 2" thick

    6.6
    10.6
    Water Vapor Permeance, ASTM E96, perm @ 1" thick3.13
    Water Absorption, ASTM D2842, % by volume5.44
    Air Permeability, ASTM E2178 air leakage at 1" thick, l/min @ 75 Pa0
    Air Permeability, ASTM E283 air leakage at 0.5" thick, ft³/min•ft² @ 75 PaValue 2
    Dimensional Stability, ASTM D2126, % volume change
    Dimensional Stability, ASTM D2126, % volume change
    158°F/100% RH @ 1 wk
    158°F/100% RH @ 2 wks
    -40°F/amb RH @ 1 wk
    -40°F/amb RH @ 2 wks

    0.70
    -0.06
    0.02
    0.36
    Compressive Strength, ASTM D1621, lb/in², parallel23.4
    Flexural Strength, ASTM C203, lb/in², parallel22.7
    Tensile Strength, ASTM D1623, lb/in², parallel36
    Shear Strength, ASTM C273, lb/in², parallel12.7
    Maximum Service Temperature, °F240

    * Values may differ for FROTH-PAK™ 12 and specialty kits. Contact a Dow representative for more information.
    ** This numerical flame spread rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
    *** R means resistance to heat flow. The higher the R-value, the greater the insulating power.

    Videos

    Reviews
    Product Question

    Product Questions

    Can this be used on the exterior or on a flat roof
    8
    How many square feet does the froth pak 620 kit cover?
    6
    Can the foam be sprayed thicker than 1”
    2
    Where do you get the refillable tanks A and B refilled? I would like to have refilled instead of ordering two kits
    -1
    Shipping Calculator