Bradford White's residential EverHot® tankless water heaters supply continuous hot water at a set temperature to the entire house. These units only operate when there's a call for hot water resulting in reduced energy consumption. These models also save space and are available for indoor or outdoor installation. Features:
ENERGY STAR® Qualified These models qualify for the January 1st, 2009 minimum ENERGY STAR® EF requirement, as well as most utility rebate programs.
Interior and Exterior Models Twelve units (Natural Gas and Propane Gas) with self regulating maximum BTU/hr. inputs ranging from 150,000-199,000.
Digital Main ControllerInterior models have a digital controller integrated into the front panel of the water heater with a default temperature range of 96°F-120°F (140°F maximum). Exterior models are shipped with a primary remote controller with a default temperature range of 96°F-120°F (140°F maximum). An optional Main Controller/Residential (p/n 239-44509-00) can be wired remotely and provides a default temperature range of 96°F-120°F (140°F maximum).
Commercial Conversion Capability For application flexibility, all models can be converted to a commercial model with the use of a commercial controller.
Commercial Controller An optional Main Controller/Commercial (p/n 239-47805-00) is available for commercial and hydronic applications (maximum temperature setting for each model on reverse side).
Continuous Flow Supplies hot water continuously at the temperature set point.
Heat Exchanger Nine pass design to maximize heat transfer and efficiency.
Direct Electronic Ignition No standing pilot.
Fully Automatic Controls Outgoing water temperature is monitored by a built-in sensor. Burner and combustion blower modulate between minimum and maximum input to maintain setpoint temperature.
Diagnostic Capabilities Error messages in numerical codes are displayed on primary control.
Space Saving Installation Compact size for tight installations (mounts on the wall).
Lime Accumulation Sensor Built into the heat exchanger to alert of build-up.
Co-Axial Venting Interior models can be vented horizontally through a wall or vertically through the roof. Maximum equivalent vent length is 41ft. Interior models have dedicated venting system components that must be ordered separately (see I&O manual for specific venting components).